Trucking 101: how to become a truck driver

Everything a beginner needs to know before getting a commercial driver's license — the license classes, the steps, the federal training rules, what it costs and how to choose a school you can actually enroll in.

Updated Nov 18, 2026 · every fact checked against official sources

31,476locations on FMCSA's training registry
26,105of them train only their own employees
4,419in-person schools open to the public
3,022teach Class A on public roads

The short version

To drive a big truck for a living in the U.S. you need a commercial driver’s license (CDL). Getting one takes five steps:

  1. Get a DOT medical card from an examiner on the National Registry.
  2. Pass the written tests and get a commercial learner’s permit (CLP).
  3. Finish entry-level driver training (ELDT) at a school on FMCSA’s Training Provider Registry.
  4. Wait at least 14 days after your permit was issued.
  5. Pass the skills test: a vehicle inspection, basic control maneuvers and a road test.

The rest of this guide explains each step, what it costs and how to pick a school.

Which CDL do you need? Class A, B or C

Federal rules sort commercial vehicles into three groups (49 CFR 383.91):

Class What it covers Typical jobs
Class A A combination with a gross combination weight rating of 26,001 lb or more, where the trailer is rated over 10,000 lb Tractor-trailers (“18-wheelers”), most over-the-road trucking
Class B A single vehicle rated 26,001 lb or more (it may tow a trailer up to 10,000 lb) Straight trucks, dump trucks, many city buses
Class C Smaller vehicles built to carry 16 or more people (including the driver) or that haul placarded hazardous materials Shuttle vans, small hazmat vehicles

Most new truck drivers go for Class A. Someone who passed the Class A tests can also drive Class B and C vehicles, as long as they have the endorsements that vehicle needs.

Endorsements

Some loads need an extra endorsement on your CDL (49 CFR 383.93):

Code Endorsement Test
T Double/triple trailers Knowledge test
N Tank vehicle Knowledge test
H Hazardous materials Knowledge test (plus a background check)
X Tank + hazmat combined —
P Passenger Knowledge and skills test
S School bus Knowledge and skills test

Step by step

1. Medical card and age

Drivers who cross state lines must pass a DOT physical from a medical examiner listed on the National Registry of Certified Medical Examiners, and repeat it at least every 24 months.

You can get a learner’s permit at 18. Driving across state lines requires age 21 under federal rules (49 CFR 391.11); states such as Texas, California and Florida let 18- to 20-year-olds drive commercially within the state only. Interstate drivers must also be able to read and speak English well enough to talk with the public and read road signs.

2. Commercial learner’s permit (CLP)

You get a CLP at your state’s licensing office after passing the knowledge tests — for Class A usually General Knowledge, Combination Vehicles and Air Brakes. A CLP is required before your first CDL. Under federal rules it lasts no more than a year; Texas and California issue it for 180 days.

With a CLP you can practice in a truck only with a CDL holder licensed for that vehicle sitting in the front seat next to you (49 CFR 383.25).

3. Entry-level driver training (ELDT)

Since February 7, 2022, anyone getting a Class A or B CDL for the first time — or upgrading from B to A, or adding the S, P or H endorsement for the first time — must complete entry-level driver training from a provider on FMCSA’s Training Provider Registry.

Most registered training locations won’t take you. Of the more than 30,000 locations on the registry, over 80% are trucking companies and employers that only train their own staff. Search schools that accept the public or browse by state.

4. Hold the permit for 14 days

Federal rules don’t let you take the CDL skills test in the first 14 days after your CLP is issued. Training usually takes longer than that anyway.

5. Skills test

The skills test has three parts:

  1. Vehicle inspection (pre-trip): show and explain how you check the truck.
  2. Basic vehicle control: backing and maneuvering exercises.
  3. Road test in traffic.

Depending on the state, you test at a state office or with a state-certified third-party tester; Florida, for example, lists only contracted third-party test sites. You usually provide the truck, so ask your school whether you can test in one of theirs.

What does it cost?

There are three kinds of cost: state fees, the skills test (in states that use third-party testers) and tuition, which is by far the biggest and varies widely from school to school.

State fees in the three biggest states, from their official fee pages:

Texas California Florida
Learner’s permit $25 Included in application fee —
CDL (original) $97 (8 years) $100 $75
Skills retest — $46 $20 state fee
Skills test at third-party site Set by tester — $199–$700 (Class A, set by each site)

Ask any school for the total price in writing: tuition, permit and license fees, the medical exam, test fees and what a retest costs.

How to pay for CDL school

How to choose a CDL school

  1. Make sure it accepts the public. Every school on Trucker101’s state and city pages does.
  2. Check its registry status. Avoid schools that have been removed by FMCSA, and ask questions if one is under review. Use the school status checker.
  3. Match the license you need. For tractor-trailer work you want Class A with behind-the-wheel training on public roads — each school page shows what it is registered to teach.
  4. Ask about the skills test. Can you test in the school’s truck? Is the test fee included?
  5. Compare total cost and schedule, including weekend or evening classes if you’re working.

“Be your own boss”: owner-operators

Many people search “trucking 101” because they want to run their own truck someday. Nearly everyone starts with a CDL and time as a company driver. Hauling freight under your own name later means getting your own USDOT number and operating authority from FMCSA and handling insurance, maintenance and finding loads yourself — that’s a different topic from getting your license. Start with the CDL.

Next steps

Ready to find a school?

Search 4,419 CDL schools that accept the public, by ZIP code or city.

Find schools

Sources: FMCSA: Entry-level driver training · 49 CFR 383.91 (vehicle groups) · 49 CFR 383.93 (endorsements) · 49 CFR 383.25 (learner's permit) · 49 CFR 383.71 (applicant requirements) · 49 CFR 380 Appendix A (ELDT curriculum) · 49 CFR 380.717 (training certification) · 49 CFR 391.11 and 391.45 (driver qualification, medical) · Texas DPS fees · California DMV fees · Florida FLHSMV fees