Q1Tank types & baffles
What do bulkheads do inside a liquid tank?
- ALet liquid flow freely from front to back
- BDivide it into several smaller tanks
- CKeep the cargo warm in cold weather
- DVent vapors out of the tank
Show answerHide answer
Answer B Divide it into several smaller tanks
Bulkheads divide one large tank into several smaller tanks (compartments).
Texas CDL Handbook §8.2.3
Q2Tank types & baffles
How does a baffle differ from a solid bulkhead?
- AA baffle is a removable cover on top of the tank
- BA baffle seals each compartment completely
- CA baffle runs along the length of the tank to stop side-to-side movement
- DA baffle has holes that let liquid pass through it
Show answerHide answer
Answer D A baffle has holes that let liquid pass through it
Baffles are bulkheads with openings in them, so liquid can still move between sections, but its flow is slowed.
Texas CDL Handbook §8.2.4
Q3Tank types & baffles
Why do tanks that haul food products such as milk usually have no baffles?
- ABaffles would make the tank too heavy to load fully
- BFood products do not surge
- CBaffles would mix products from different compartments
- DSanitation rules forbid baffles because they make the tank hard to clean
Show answerHide answer
Answer D Sanitation rules forbid baffles because they make the tank hard to clean
Food-grade tanks are usually smooth bore because sanitation rules do not allow baffles, which are difficult to clean.
Texas CDL Handbook §8.2.5
Q4Liquid surge
What causes liquid surge?
- AAir pressure building up in the tank vents
- BLiquid expanding as it warms
- CLiquid moving around in a tank that is only partly full
- DToo much weight on the front axle
Show answerHide answer
Answer C Liquid moving around in a tank that is only partly full
Surge is the movement of liquid inside a partially filled tank, and it can hurt the way the vehicle handles.
Texas CDL Handbook §8.2.2
Q5Liquid surge
You come to a stop and the liquid in your tank sloshes forward and hits the front of the tank. What does this tend to do to the truck?
- APull it backward, away from the wave
- BLift the front wheels off the road
- CHave no effect once the brakes are applied
- DShove it the same way the liquid is moving
Show answerHide answer
Answer D Shove it the same way the liquid is moving
When the moving liquid strikes the end of the tank, it shoves the truck the same way the wave is traveling.
Texas CDL Handbook §8.2.2
Q6Liquid surge
How should you use the brakes to help control surge as you come to a stop?
- APump the brakes quickly several times
- BKeep steady pressure and do not let off too early
- CBrake hard at the last moment, then release
- DRelease the brakes as soon as the truck slows
Show answerHide answer
Answer B Keep steady pressure and do not let off too early
To control surge, hold steady pressure on the brake pedal and do not let up too soon as you come to a stop.
Texas CDL Handbook §8.3.2
Q7Outage & load weight
What does the term "outage" mean for a cargo tank?
- ASpace left empty so the liquid has room to expand
- BThe amount of liquid lost through the vents
- CThe time a tank must sit empty after cleaning
- DThe weight limit for a single compartment
Show answerHide answer
Answer A Space left empty so the liquid has room to expand
Outage is the room you leave in the tank because liquids grow in volume as they warm.
Texas CDL Handbook §8.2.6
Q8Outage & load weight
Do all liquids need the same amount of outage?
- AYes, every liquid needs the same fixed amount
- BYes, as long as the tank has baffles
- CNo, only hazardous liquids need any outage
- DNo, because different liquids expand by different amounts
Show answerHide answer
Answer D No, because different liquids expand by different amounts
Different liquids expand by different amounts, so the outage needed depends on what you haul. You must know the outage requirement for your load.
Texas CDL Handbook §8.2.6
Q9Outage & load weight
What can happen if you completely fill a tank with a very heavy liquid, such as certain acids?
- AThe vehicle may go over legal weight limits
- BThe liquid will freeze in transit
- CThe baffles will stop working
- DThe tank will have too much outage
Show answerHide answer
Answer A The vehicle may go over legal weight limits
Heavy liquids weigh a lot per gallon, so a full tank of them can exceed weight limits.
Texas CDL Handbook §8.2.7
Q10Inspection
On every tank vehicle, what is the most important thing to check for during inspection?
- ATire tread depth
- BLeaks
- CPaint condition
- DMirror adjustment
Show answerHide answer
Answer B Leaks
The top inspection item on any tank vehicle is leaks. Look beneath and all around the vehicle for any sign of leaking.
Texas CDL Handbook §8.1.1
Q11Inspection
When should a tanker's cut-off, intake, and discharge valves be checked to be sure they are in the right position?
- AOnly after unloading
- BOnly once a week
- COnly when a leak is found
- DBefore you load, unload, or move the tank
Show answerHide answer
Answer D Before you load, unload, or move the tank
Make sure each of these valves is set correctly before you load, unload, or move the tank vehicle.
Texas CDL Handbook §8.1.1
Q12Inspection
Which of these is listed as special-purpose equipment you should check, if your tank vehicle has it?
- AGrounding and bonding cables
- BA CB radio
- CA sleeper berth heater
- DCruise control
Show answerHide answer
Answer A Grounding and bonding cables
Equipment to test, when your vehicle has it: emergency shut-off systems, a built-in fire extinguisher, vapor recovery kits, and grounding and bonding cables.
Texas CDL Handbook §8.1.2
Q13Inspection
Before pulling away with a tank vehicle, which of these must never be the case?
- AThe tank is partly full
- BThe tank has baffles
- CThe vents are clear
- DA manhole cover or valve is left open
Show answerHide answer
Answer D A manhole cover or valve is left open
Every valve and manhole cover must be closed before the tank vehicle moves.
Texas CDL Handbook §8.1.2
Q14Driving safely
How should you take highway curves and on-ramps or off-ramps in a liquid tanker?
- AAt the posted speed, since it is set for trucks
- BWell below the posted speed
- CSlightly above the posted speed to keep momentum
- DAt the posted speed if the tank is full
Show answerHide answer
Answer B Well below the posted speed
Tests have shown tankers can roll over at the speeds posted for curves, so go well under those speeds.
Texas CDL Handbook §8.2.1
Q15Driving safely
What is the right way to handle a curve in a tank vehicle?
- ASlow down before the curve, then speed up slightly through it
- BEnter at the posted speed, then brake in the curve
- CCoast through the curve in neutral
- DBrake firmly all the way through the curve
Show answerHide answer
Answer A Slow down before the curve, then speed up slightly through it
Do your slowing before you reach the curve, then accelerate a little as you go through it. A curve's posted speed can be more than a tanker can safely handle.
Texas CDL Handbook §8.3.3
Q16Driving safely
You need to stop fast to avoid a collision in a tank vehicle. Which braking method should you use?
- ALock all the wheels and hold the pedal down
- BPump the brakes while steering hard
- CUse only the trailer hand valve
- DControlled or stab braking
Show answerHide answer
Q17Driving safely
Which of these helps you avoid a skid in a tank vehicle?
- ABraking hard and steering quickly together
- BAccelerating firmly through turns
- CReleasing the brakes early at every stop
- DNot oversteering, over-accelerating, or overbraking
Show answerHide answer
Answer D Not oversteering, over-accelerating, or overbraking
Too much steering, acceleration, or braking can start a skid, so avoid all three.
Texas CDL Handbook §8.3.5
Q18Federal rules
Under the federal definition of a tank vehicle, each tank counted must have an individual rated capacity of more than how many gallons?
- A55 gallons
- B119 gallons
- C500 gallons
- D1,000 gallons
Show answerHide answer
Answer B 119 gallons
The definition covers tanks that are each rated above 119 gallons and together rated at 1,000 gallons or more.
49 CFR 383.5
Q19Federal rules
Under the federal definition of a tank vehicle, what must the total (aggregate) rated capacity of the tanks be?
- A119 gallons or more
- B500 gallons or more
- C1,000 gallons or more
- D2,000 gallons or more
Show answerHide answer
Answer C 1,000 gallons or more
Along with each tank being rated at more than 119 gallons, the tanks together must be rated at 1,000 gallons or more.
49 CFR 383.5
Q20Federal rules
Must the cargo be hazardous for a vehicle to need a tank endorsement?
- AYes, only hazardous liquids count
- BNo, any liquid or gas in qualifying tanks can require it
- CYes, only flammable gases count
- DNo, but only liquid food products count
Show answerHide answer
Answer B No, any liquid or gas in qualifying tanks can require it
The tank endorsement is about hauling liquids or gases in tanks of the rated size. The cargo does not have to be hazardous.
Texas CDL Handbook §8