Q1Alcohol & drugs
Under the federal drug and alcohol testing rules, a driver may not report for or remain on safety-sensitive duty with an alcohol concentration of what or greater?
Show answerHide answer
Answer A 0.04
Part 382 prohibits safety-sensitive duty at an alcohol concentration of 0.04 or greater. Separate rules also bar any measurable alcohol while on duty.
49 CFR 382.201
Q2Alcohol & drugs
How long must a driver wait after using alcohol before performing safety-sensitive functions, such as driving a CMV?
- A2 hours
- B4 hours
- C8 hours
- D12 hours
Show answerHide answer
Answer B 4 hours
No driver may perform safety-sensitive functions within 4 hours after using alcohol.
49 CFR 382.207
Q3Alcohol & drugs
A driver found with any measurable alcohol while on duty is placed out of service for how long?
- A8 hours
- B12 hours
- C24 hours
- D48 hours
Show answerHide answer
Answer C 24 hours
A driver who violates the alcohol prohibition is placed out of service immediately for 24 hours.
49 CFR 392.5
Q4Hours of service
After 10 consecutive hours off duty, how many hours may a property-carrying driver drive?
- A8 hours
- B10 hours
- C11 hours
- D14 hours
Show answerHide answer
Answer C 11 hours
A property-carrying driver may drive a total of 11 hours within the 14-hour period that starts after 10 consecutive hours off duty.
49 CFR 395.3
Q5Hours of service
A property-carrying driver may not drive after how many consecutive hours since coming on duty (following 10 hours off)?
Show answerHide answer
Answer C 14
Driving is not allowed after 14 consecutive hours from coming on duty. Ordinary breaks don't extend this window (only qualifying split sleeper-berth periods are treated differently).
49 CFR 395.3
Q6Hours of service
Under the federal break rule, driving is not allowed once a driver has driven how long without a 30-minute interruption?
- A4 hours
- B6 hours
- C8 hours
- D10 hours
Show answerHide answer
Answer C 8 hours
After 8 hours of driving time, a driver needs at least a consecutive 30-minute interruption — off duty, sleeper berth or on duty not driving.
49 CFR 395.3
Q7Hours of service
If the motor carrier operates every day of the week, a driver may not drive after being on duty how many hours in any 8 consecutive days?
Show answerHide answer
Answer B 70
The limit is 70 hours in 8 consecutive days for carriers operating every day, or 60 hours in 7 days for carriers that don't.
49 CFR 395.3
Q8Hours of service
What off-duty period restarts the 60/70-hour weekly limit?
- A10 consecutive hours
- B24 consecutive hours
- C34 consecutive hours
- D48 consecutive hours
Show answerHide answer
Answer C 34 consecutive hours
A 7- or 8-day period may end with the start of an off-duty period of 34 or more consecutive hours (a "34-hour restart").
49 CFR 395.3
Q9Hours of service
Before starting a work shift, a property-carrying driver must first take how many consecutive hours off duty?
Show answerHide answer
Answer B 10
A driver may not drive without first taking 10 consecutive hours off duty.
49 CFR 395.3
Q10Medical
Generally, how often must a CMV driver be medically examined and certified?
- AEvery 12 months
- BEvery 24 months
- CEvery 36 months
- DEvery 48 months
Show answerHide answer
Answer B Every 24 months
A driver must be re-examined if not certified within the preceding 24 months. Some medical conditions require shorter intervals.
49 CFR 391.45
Q11Railroad crossings
A vehicle that must always stop at railroad crossings must stop how far from the nearest rail?
- AWithin 50 feet but no closer than 15 feet
- BWithin 100 feet but no closer than 25 feet
- CWithin 25 feet but no closer than 5 feet
- DExactly 20 feet
Show answerHide answer
Answer A Within 50 feet but no closer than 15 feet
The vehicle must stop within 50 feet of, and not closer than 15 feet to, the tracks, then look and listen in both directions.
49 CFR 392.10
Q12Railroad crossings
A vehicle that must stop at railroad crossings is crossing the tracks. What must the driver avoid?
- AUsing headlights
- BShifting gears
- CUsing the horn
- DDriving below 10 mph
Show answerHide answer
Answer B Shifting gears
Vehicles required to stop must cross in a gear that lets them complete the crossing without changing gears, and must not shift gears while crossing.
49 CFR 392.10
Q13Railroad crossings
Which of these must always stop before crossing railroad tracks?
- AAn empty dump truck
- BA bus carrying passengers
- CA tractor-trailer hauling furniture
- DA box truck with no cargo
Show answerHide answer
Answer B A bus carrying passengers
Every bus transporting passengers must stop at railroad grade crossings, as must many vehicles placarded for hazardous materials.
49 CFR 392.10
Q14Stopped vehicles
Your CMV breaks down on the shoulder of a highway. When must you turn on the hazard warning flashers?
- AWithin 10 minutes
- BImmediately
- COnly at night
- DOnly after placing triangles
Show answerHide answer
Answer B Immediately
Activate the hazard flashers immediately and keep them flashing until the warning devices are placed.
49 CFR 392.22
Q15Stopped vehicles
After stopping on the shoulder of a highway, within what time must you place your warning devices?
- A5 minutes
- B10 minutes
- C15 minutes
- D30 minutes
Show answerHide answer
Answer B 10 minutes
Warning devices must be placed as soon as possible, and in any event within 10 minutes.
49 CFR 392.22
Q16Stopped vehicles
On an undivided road, where do the three warning devices go around a stopped CMV?
- AAbout 10 ft back on the traffic side, 100 ft back toward approaching traffic, and 100 ft ahead
- B50 ft behind, 100 ft behind, and 150 ft behind
- C10 ft behind, 50 ft behind, and 100 ft ahead
- DAll three 100 ft behind the vehicle
Show answerHide answer
Answer A About 10 ft back on the traffic side, 100 ft back toward approaching traffic, and 100 ft ahead
One goes about 10 feet from the vehicle on the traffic side toward approaching traffic, one 100 feet back toward approaching traffic, and one 100 feet away in the other direction.
49 CFR 392.22
Q17Stopped vehicles
On a divided or one-way highway, where do you place the warning devices?
- A10 ft, 100 ft and 200 ft toward approaching traffic
- B100 ft ahead and 100 ft behind
- C50 ft, 100 ft and 150 ft ahead of the vehicle
- D200 ft ahead, 100 ft behind and 10 ft ahead
Show answerHide answer
Answer A 10 ft, 100 ft and 200 ft toward approaching traffic
On divided or one-way roads all three go toward approaching traffic: one within 10 feet of the rear, one at 100 feet and one at 200 feet.
49 CFR 392.22
Q18Stopped vehicles
You stop within 500 feet of a curve or hill crest that blocks the view. How far from your vehicle, in the direction of the curve or crest, must you place a warning device?
- A50 to 100 feet
- B100 to 500 feet
- C500 to 1,000 feet
- DExactly 200 feet
Show answerHide answer
Answer B 100 to 500 feet
Place the warning device in the direction of the obstruction 100 to 500 feet from the stopped vehicle so other drivers get enough warning.
49 CFR 392.22
Q19Emergency equipment
Which warning devices meet the federal requirement for a truck or bus?
- ATwo orange cones
- BThree bidirectional reflective triangles
- COne road flare
- DFour hazard lamps
Show answerHide answer
Answer B Three bidirectional reflective triangles
Every power unit must carry three bidirectional emergency reflective triangles, or at least six fusees.
49 CFR 393.95
Q20Emergency equipment
What is the minimum fire extinguisher rating for a power unit that is NOT used to transport hazardous materials?
- A2 A
- B5 B:C
- C10 B:C
- D20 A:B:C
Show answerHide answer
Answer B 5 B:C
A non-hazmat power unit needs one 5 B:C extinguisher, or two rated 4 B:C each.
49 CFR 393.95
Q21Distracted driving
You are stopped at a red light in your CMV with the engine running. May you send a text message?
- AYes, because the vehicle is stopped
- BYes, if traffic is light
- CNo, it still counts as driving
- DOnly with one hand
Show answerHide answer
Answer C No, it still counts as driving
Texting is prohibited while driving, and driving includes being temporarily stopped because of traffic or a traffic signal.
49 CFR 392.80
Q22Distracted driving
When may a CMV driver use a hand-held mobile phone while driving?
- ATo call dispatch
- BTo check a map
- CTo contact law enforcement or emergency services
- DNever, under any circumstances
Show answerHide answer
Answer C To contact law enforcement or emergency services
The only exception is communicating with law enforcement officials or other emergency services.
49 CFR 392.82
Q23Equipment
Are radar detectors allowed in a commercial motor vehicle?
- AYes, if turned off
- BYes, in states that allow them
- CNo, they may not be used or even carried
- DOnly on interstate highways
Show answerHide answer
Answer C No, they may not be used or even carried
No driver may use a radar detector or operate a CMV that is equipped with or contains one.
49 CFR 392.71
Q24Safety
When must a CMV driver wear a seat belt?
- AOnly on highways
- BOnly when carrying passengers
- CWhenever operating a CMV that has one installed
- DOnly above 45 mph
Show answerHide answer
Answer C Whenever operating a CMV that has one installed
A driver may not operate a CMV with a seat belt at the driver's seat unless properly restrained by it.
49 CFR 392.16
Q25Cargo
When must a truck driver first inspect the cargo and its securement devices after starting a trip?
- AWithin the first 25 miles
- BWithin the first 50 miles
- CWithin the first 100 miles
- DAt the first rest stop
Show answerHide answer
Answer B Within the first 50 miles
Inspect the cargo and securement devices within the first 50 miles after beginning a trip and adjust as needed.
49 CFR 392.9